Description
Émetteur de poche série 5000 avec connecteur à 4 broches vissable de type cH.
Sélectionnez un microphone ou un câble avec un connecteur à 4 broches vissable de type cH à utiliser avec l’émetteur de poche ATW-T5201
.
Product Details
CARACTÉRISTIQUES
Un bouton multifonction unique peut être utilisé pour passer à une fréquence de secours (sur l’émetteur et le récepteur) en cas d’interférence
Corps métallique robuste et ergonomique, écrans OLED très visibles, fonctions programmables, commandes tactiles et puissance RF commutable de 2/10/50 mW
Le connecteur robuste de type cH offre une connexion sécurisée aux micros-cravates, aux micros serre-tête et aux câbles avec connecteur à 4 broches vissé de type cH
SPÉCIFICATIONS TECHNIQUES
| Overall System | |
|---|---|
| Minimum Frequency Step | 25 kHz |
| Modulation Mode | FM |
| Maximum Deviation | ATW-T5201: ±40 kHz (THD:10%) ATW-T5202: ±40 kHz (THD:10%) |
| Frequency Response | ATW-T5201: 23 Hz to 16,300 Hz ATW-T5202: 33 Hz to 16,300 Hz Frequency response depends on attached microphone element |
| Operating Range | 100 m (328′) Open range environment with no interfering signals. |
| Total Harmonic Distortion | <1.0% (at 1 kHz, ±17.5 kHz deviation) |
| Handheld Transmitter | |
|---|---|
| RF Power Output | High: 50 mW, Mid: 10 mW, Low: 2mW (switchable), at 50 ohms (country dependent) |
| Spurious Emissions | Following Federal and National Regulations |
| Battery Type | Two 1.5V AA, not included |
| Battery Life | High: 6.5 hours Mid: 8 hours Low: 9.5 hours (alkaline) Depending on battery type, usage and environmental conditions. |
| Dimensions | ATW-T5202 (without capsule): 193 mm (7.60″) long, 37 mm (1.46″) maximum diameter ATW-T5202/C510: 265mm (10.43″) long, 54 mm (2.13″) maximum diameter ATW-T5202/C710: 271mm (10.67″) long, 50 mm (1.97″) maximum diameter |
| Net Weight | ATW-T5202 (without capsule): 200g (7.1oz) ATW-T5202/C510: 330g (11.6oz) ATW-T5202/C710: 314g (11.1oz) (without batteries) |
| Accessories Included | AT8456a Quiet-Flex™ stand clamp (5/8″-27 male to 3/8″-16 female threaded screw adapter); AT-BG3 Protective Carrying Case |
| Body Pack | |
|---|---|
| RF Power Output | High: 50 mW, Mid: 10 mW, Low: 2mW (switchable), at 50 ohms (country dependent) |
| Battery Life | High: 7 hours Mid: 9 hours Low: 10.5 hours (alkaline) Depending on battery type, usage and environmental conditions. |
| Battery Type | Two 1.5V AA, not included |
| Dimensions | 62 mm x 70 mm x 17 mm (W x D x H) 2.44″ x 2.75″ x 0.67″ (W x D x H) |
| Input Connections | Four Pin Locking Connector Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +10V |
| Net Weight | 92 g (3.2 oz), without batteries |
| Spurious Emissions | Following Federal and National Regulations |
| Receiver | |
|---|---|
| Receiving System | True Diversity |
| Image Rejection | 80 dB nominal |
| Maximum Output Level | XLR, balanced: +18 dBV |
| Headphone Output | Headphone Output Connector: 6.3 mm (1/4″) TRS Stereo Headphone Output Power: 180 mW, typical |
| Antenna Input | BNC-type, 50 ohms |
| Power Supply | 100-240VAC 50/60Hz |
| Dimensions | 482.0 mm x 361.0 mm x 43.0 mm (W x D x H) 18.98″ x 14.21″ x 1.69″ (W x D x H) |
| Weight | 4800 g (169.3 oz), without accessories |
| Accessories Included | Two Flexible UHF antennas; Power Cable (country dependent); Legs x4 (4 mounting screws) |
Envoyer une demande de devis
