Description

Le système sans fil Engineered Sound est disponible en deux configurations :
ESW-R4180DAN – compatible Dante™
ESW-R4180LK – compatible A-T LINK

La demande de microphones sans fil a augmenté en raison de la prévalence croissante de la vidéoconférence et de la conférence Web. Le système sans fil Engineered Sound d’Audio-Technica est un système sans fil DECT qui offre un son de haute qualité simple, intelligent et évolutif. Ce système surmonte de nombreux défis des microphones sans fil conventionnels, tels que la coordination des fréquences et le nombre limité de microphones simultanés.

L’utilisation est incroyablement simple pour les utilisateurs finaux, les microphones étant prêts à l’emploi en les retirant simplement de la station de charge. Une fois complètement chargées, les batteries offrent un fonctionnement toute la journée. L’installation est également facilitée grâce au PoE pour alimenter le(s) récepteur(s) et aux capacités de sortie audio Dante. Les intégrateurs système sont en mesure de configurer des paramètres détaillés pour répondre à une grande variété de besoins des utilisateurs finaux. Le câblage est aussi simple que la connexion d’un seul câble Cat 5e à un commutateur réseau PoE.

La configuration et la gestion sont contrôlées via le logiciel Wireless Manager d’Audio-Technica, qui est capable de gérer plusieurs systèmes sans fil, y compris les systèmes sans fil UHF, à partir d’un seul écran. De plus, le cryptage AES256 est fourni en standard, offrant une sécurité supérieure et un fonctionnement fiable.

Scalable Up to 192 Simultaneous Usable Channels

All-Day Operation On a Full Charge

Automatic DECT-Based Frequency Management

Dante Audio Output

Up to 192 Simultaneous Channels

High Channel Count

Select from standard mode (Up to 96 channels) to minimize latency, and HD mode (Up to 192 channels) to maximize the number of channels.

Rapid Recharge in as Little as 2 Hours

Best-in-Class Battery Life

Internal batteries offer all-day operation on full charge. Boundary: Up to 22 hours Desk Stand: Up to 17 hours Body-Pack: Up to 25 hours Handheld: Up to 35 hours

Cat 5e Cable, Dante

Simple To Install

Remove from Charger – You’re Ready to Go

Simple to Use

ESW-R4180DAN

8-Channel Receiver

• Onboard LEDs verify link status at a glance
• Dual network ports allow Dante and IP control separation
• Supports mixed output for situations with limited input channels
• Monitor transmitter status, audio level, remaining battery time, and other information in A-T Wireless Manager

ESW-T4106

Boundary Microphone Transmitter

• Selectable omnidirectional and cardioid polar patterns
• 2-state RGB LED mute status indicator (7 selectable colors)
• Selectable mute operation (toggle, touch-to-talk, or touch-to-mute)
• Transmitter can be set to start either muted or unmuted
• Transmitter can be used while charging via USB-C type connection

ESW-T4107

Desk Stand Transmitter

• 2-state RGB LED mute status indicator (7 selectable colors)
• Compatible with ES925 Series gooseneck microphones
• Transmitter can be used while charging via USB-C type connection
• Selectable mute operation (toggle, touch-to-talk, or touch-to-mute)
• Transmitter can be set to start either muted or unmuted

ESW-T4101

Body-Pack Transmitter

• Built-in high-quality microphone
• Transmitter neck strap included
• Lightweight design
• Compact, sweat-resistant cH-type connectors for use with a variety of Audio-Technica microphones

ESW-T4102/C510

Handheld Transmitter

• Comes equipped with cardioid dynamic capsule (ATW-C510)
• Slide-to-mute switch
• Compatible with a wide array of interchangeable Audio-Technica wireless microphone capsules
• Robust metal design

Up to 8-Channels per Receiver

Small to Medium Conference Room Use

Any combination of up to 8 handheld, body-pack, desk stand, or boundary transmitters may be used simultaneously with a single ESW-R4180DAN receiver. Simply connect a receiver via Cat 5e cable to a PoE network switch. To further simplify cable management, 8 bays of transmitter charging may be powered off of one AC adapter and connected via one Cat 5e cable for monitoring.

Up to 192 Channels of ES Wireless

Large Conference Room Use

Any combination of up to 8 handheld, body-pack, desk stand, or boundary transmitters may be used simultaneously with each ESW-R4180DAN receiver. Up to 12 receivers can be used providing a maximum count of 192 simultaneous channels (when utilizing HD mode). Simply connect each receiver via Cat 5e cable to a PoE network switch. To further simplify cable management, 8 bays of transmitter charging may be powered off of one AC adapter and connected via one Cat 5e cable for monitoring.

+10

ESW-CHG4

Two-Bay Charging Station

• Rapid recharge support (approx. 2 hours for ESW-T4101; approx. 3 hours for ESW-T4102)
• Link up to 4 charging stations with just one AC adapter and Cat 5e cable
• Charging status and battery level appear in A-T Wireless Manager software
• Microphone hanger included for convenient lavalier microphone storage
• Ability to update firmware remotely on all docked transmitters

ESW-CHG5

Four-Bay Desk Stand and Boundary Charging Station

• Rapid recharge in as little as 2 hours
• Link up to 2 charging stations with just one AC adapter and Cat 5e cable
• Charging status and battery level appear in A-T Wireless Manager software
• Ability to update firmware remotely on all docked transmitters

Free, Easy-to-Use Software

Wireless Manager Software

A powerful easy-to-use tool, Wireless Manager allows users to configure, monitor, and save device settings as well as communicate with additional A-T wireless systems.

Secure Communications

Security Built-In

Stay confident that your communications will remain safe and secure with AES256 encryption support.